Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 6-8 workdays
- Order number: 1010-1020
The "JG Titan Style MKII" upgrade allows the conversion to a direct extruder in Titan Still (Deisgn by E3D). The advantages are the precise control of the filament feed, which allows easier and clean printing of detailed parts and provides better surfaces. All components can be connected to the original connections by plugs - no soldering is necessary.
NOTE: The white parts in the picture only show the intended use and are not included!
The JG Titan MKII Kit consists of the following components:
JG Titan MKII
Take full advantage of the Titan Style extruder in E3D design.
• High Feed Rate
The 3:1 ratio in combination with a Nema17 / 25 stepper with fabulous 18Ncm torque results in an enormous feed force compared to the weight.
• High Speed
Due to the low weight and the translation, large extrusion quantities and extremely fast retracts can be realized.
• High Resolution
Many extruders have problems with pulsating or very small filament flow. The 3:1 ratio triples the feed resolution and allows extremely accurate contouring at very small layer heights.
JG Height MKII
The heart of the JG Titan MKII upgrade - the mechanically height-adjustable "JG Height MKII" IR height sensor by David Crocker.
• Calibration without G-Code & Scripting
The height adjustable by an aluminum wheel IR sensor can be adjusted by + -5mm in height. The only thing you need to do is bring the Nozzle to the bed at a height of 0.5mm using the Z-axis method. Then the height sensor can simply be adjusted by turning the adjusting wheel until the red LED indicates contact.
• No temperature-related tolerances
The IR sensor is temperature insensitive to most other sensors available on the market and always delivers constant values compared to induction sensors. Thus, printing at different room temperatures or extremely different pressure temperatures without recalibration is easily possible.
JG Cooler MKII
The temperatures are always under control with the "JG Cooler MKII" Radial Cooler System.
• Extreme cooling performance
The high-quality 50x50x15mm Radial Cooler from the company Xinyujie with fabulous 0.2A and a maximum speed of 6500UpM can, if necessary, build up a pressure of up to 30mmH2O. The 30x30x10mm Xinyujie heater block cooler has an output of 0.15A which represents an increase of 200% compared to the original cooler and allows printing at temperatures of 260-300c with "Full Metal Hotend" * (* optional).
• Auto Restart function
Both coolers have an auto-restart function which restarts the fans at low speeds in case of a standstill.
• Backwards compatible
The "JG Cooler MKII" has the original connection for fan ducts. Thus you can use all fan ducts available for the A5 and A3S.
JG F-Duct MKII
|Scope of supply:||1x JG Titan MKII, 1x JG Height MKII, 1x JG Cool MKII, 1x JG F-Duct MKII, cable set, screw set, mounting material, assembly instructions|
|Shipping weight:||0,5 Kg|