- Order number: 1010-1050
The JG TITAN MKII V2 Lite "Kit" upgrade allows the conversion to a direct extruder in Titan Still (Deisgn by E3D). The advantages are the precise control of the filament feed, which allows easier and clean printing of detailed parts and provides better surfaces. All components can be connected to the original connections by plugs - no soldering is necessary.
NOTE: The white parts in the picture only show the intended use and are not included!
The JG TITAN MKII V2 Lite "Kit" consists of the following components:
|
JG Cooler MKIIThe temperatures are always under control with the "JG Cooler MKII" Radial Cooler System. • Extreme cooling performanceThe high-quality 50x50x15mm Radial Cooler from the company Xinyujie with fabulous 0.2A and a maximum speed of 6500UpM can, if necessary, build up a pressure of up to 30mmH2O. The 30x30x10mm Xinyujie heater block cooler has an output of 0.15A which represents an increase of 200% compared to the original cooler and allows printing at temperatures of 260-300c with "Full Metal Hotend" * (* optional). • Auto Restart functionBoth coolers have an auto-restart function which restarts the fans at low speeds in case of a standstill. • Backwards compatibleThe "JG Cooler MKII" has the original connection for fan ducts. Thus you can use all fan ducts available for the A5 and A3S. |
JG F-Duct MKII |
Color: | Black |
Material: | ABS |
Shipping weight: | 0,5 Kg |
Scope of supply: | 1x JG Titan MKII, 1x JG Cooler MKII, 1x JG F-Duct MKII, Kabelsatz, Schraubensatz, Befestigungsmaterial, Montageanleitung |